|
外觀尺寸
|
W 180 mm x D 95 mm x H 106 mm
|
|
適合光源(輸出定額)
|
24V DC Light Units, total for all connectors: 60 W max.
(SMP-03V-BC: 60 W max. per connector)
|
|
通道數
|
4 channels
|
|
發光方式
|
Strobe lighting, continuous lighting (no overdrive)
|
|
驅動方式
|
Constant lighting
|
|
調光方式
|
PWM control
|
|
PWN頻率
|
125 kHz
|
|
輸入電壓
|
100 to 240 VAC (+10% -10%)
|
|
頻率
|
50/60 Hz
|
|
消耗功率
|
152 VA
|
|
輸出電壓
|
24VDC
|
|
輸出電流
|
SM connector: 2.5 A / channel
Total channel: 2.5 A
|
|
涌入電流(typ)
|
27 A (at 100 VAC), 63 A (at 240 VAC) from a cold start
*When selecting a circuit breaker, refer to this value and select the product that has the trip characteristics suitable for use with switched mode power supplies. For information on the applicable trip characteristics, refer to the switched mode power supply manufacturer websites, etc.
|
|
外部控制協議
|
Ethernet comm., PLCCOM comm.
|
|
錯誤檢測顯示
|
Panel surface Error lamp (red) and LCD screen display
|
|
錯誤檢測輸出
|
(1) Reflection to error status (Ethernet/USB)
(2) UDP/IP packet transmission (single-shot/continuous transmission selectable) (Ethernet)
|
|
過電流保護
|
Operates at 109% or more of the output current (per channel)
Recovery by power-on, panel setting knob, or error cancellation command via Ethernet/USB communication
|
|
過電壓保護
|
Category II
|
|
輸出端口
|
SMP-03V-BC x 2
|
|
外部控制端口
|
[Trigger input/output]
Terminal block connector SL 3.50/10/180F 3.2SN OR BX (Weidmuller) 10 poles
1 to 4: input, 5: input common, 6 to 9: output, 10: output common
[Ethernet]
RJ-45
[USB]
Mini-B
|
|
觸發
|
Logic switching (High-Low switching), pin assignment change, filter time setting, emission delay time setting
|
|
適合規格
|
[Compatible standards]
CE, UKCA
[Environmental regulations]
RoHS, TSCA PBT, REACH
|
|
使用溫濕度
|
Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
|
|
保存溫濕度
|
Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
|
|
冷卻方式
|
Natural air-cooling
|
|
重量
|
1.5 kg max.
|
|
材質,涂裝,表面處理
|
Steel sheet, cover thickness: 1.6 mm, chassis thickness: 1.0 mm, black (leather satin)
|
|
附屬品
|
-
Hardware manual x 1
-
Power Terminal Block Cover x 1
-
M4 screws for the cover x 2
-
AC Power Cable (2m-long 3-prong) with ground terminal*1 x 1
-
Trigger Terminal Block*2 x 1
-
*1 Model name of AC power cable: ACC-JIS-125-7-M4-2.
AC power cable will not be included as an accessory for model names with "-NC".
Please choose the NC model for the product without AC power cable.
-
*2 Wires for trigger are not included. Please prepare them separately.
Applicable power wires: AWG 26 to 16 (0.13 to 1.31 mm2), length: within 3 m,
bare end: 8 mm (Ferrule can be used)
|
|
備注
|
Equipped with ON/OFF physical switch
Supports keep-alive function
|
|
Program
|
【Sample Program】
Sample programs are available. See the 選件 tab.
|